 |
|
  |
|
 Hamilton Drywall
Products is proud to introduce Prep Coat Plus "Level 5" as our newest addition to
our paint line. Click here for more information! |
|
|
|
|
 |
|
 |
| Delamination of
texture on drywall surfaces is an expensive and apparently increasing problem. Job site
investigation of this problem reveals not one cause, but
several. Read more >>> |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Insta-back
Fastener
Insta-back fasteners make drywall repair quick
and easy because cutouts can be reattached without cutting drywall back to the nearest stud (as
shown in the illustrations below). Insta-backs make finished butt joints that are "bump
free", and save time and money by reducing the number of joints to be finished. Meets
all building codes and fire ratings. |
|
|
| Prod# |
Desc |
Pcs/Ctn |
Ctn/Pallet |
Unit |
Wt/Ctn |
| 71010 |
1/2" |
200 |
50 |
CTN |
10 |
| 71020 |
5/8" |
200 |
50 |
CTN |
10 |
|
|
| 1 |
Place fasteners as shown and secure
with drywall screws 3/4" from the edge. |
|
2 |
Replace drywall patch in hole. |
|
3 |
Screw through patch into Insta-back
fasteners 3/4" from the edge. |
|
4 |
Bend Insta-back tabs back and forth
until they snap off. |
 Corner-back
Fastener
Corner-back fasteners save you time, money
and materials by allowing you to eliminate one stud at almost every corner. By eliminating
the need for corner back-up studs, Corner-backs permit corners to be fully insulated (as
shown in the illustration at right). This means a significant reduction in thermal loss.
Corner-backs also reduce costly callbacks due to ceiling/partition separation from truss
uplift. Meets all building codes and fire ratings. |
|
|
| Prod# |
Desc |
Pcs/Ctn |
Ctn/Pallet |
Unit |
Wt/Ctn |
| 71030 |
1/2" |
300 |
50 |
CTN |
10 |
| 71040 |
5/8" |
300 |
50 |
CTN |
10 |
|
Corner-backs eliminate wood
backup at corners and ceilings. The result is faster framing and faster, easier
drywall installation. |
|
 |
|
|
|
|
