Hamilton Drywall Products is proud to introduce Prep Coat Plus "Level 5" as our newest addition to our paint line.  Click here  for more information!
Delamination of texture on drywall surfaces is an expensive and apparently increasing problem. Job site investigation of this problem reveals not one cause, but several. Read more >>>
.PDF Version
1 1/2" Radius Bullnose
1 1/2" r. Bullnose

1 1/2" Radius

Bullnose cornerbead is used to create smooth, rounded corners. The knurled surface and distinctive hole pattern produce superior joint compound adhesion.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42500 8' 25 200 40 MF 44
42510 8'6" 24 200 40 MF 44
42520 9' 23 200 40 MF 44
42530 10' 20 200 40 MF 44
42540 10'6" 20 200 40 MF 44
42550 12' 17 200 40 MF 44

Open Angle 135 Degree Bullnose 1 1/2" r.

1 1/2" Radius

135 Degree Bullnose provides a straight smooth finish for open angles greater than 120 degrees.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42560 8' 25 200 40 MF 44
42570 10' 20 200 40 MF 44

Bullnose Kerf 1 1/2" r.

1 1/2" Radius

Kerf Bullnose provides a finished edge around door and window openings. Installation is made easier because the back flange is eliminated.
Prod# Lgth Pcs/Ctn Ft/Ctn Ctns/Pallet Unit Wt/Ctn
42580 8' 25 200 40 MF 39.5
42590 10' 20 200 40 MF 39.5

 Available by Special Order Only.


Finishing Products | Accessories | Technical Bulletins | Submittal Sheets | MSDS | Industry Links | Site Map | Contact Us | Home
Copyright © 2008 Hamilton Drywall Products, All rights reserved.